Admission Help Line Number
+91-172-3984200

Research Initiatives

 

Research Publications by Faculty

List of papers presented in International Conferences:

Author(s) Title Of Paper National/International Journal/Venue
Dr. RS Rajoria Characterization and Mechanical Properties of High Velocity Oxy-Fuel Composite Coating Deposited on Boiler Tube Steel International IJMT
Dr. RS Rajoria Total Effective Equipment Performance (TEEP) Measurement and Productivity Improvement in Medium Scale Industry International IJMT
Dr. RS Rajoria Process Capability Evaluation by Overall Equipment Effectiveness (OEE) And GR&R Method for Medium Scale Industry International IJMT
Dr. RS Rajoria Optimization of Finishing Parameters in Magnetic Abrasive Finishing process (MAF) using L-9 Taguchi Method International IJMT
Dr. RS Rajoria “Experimental Investigation of Process Parameter of MAF on Surface Roughness” International IJMT
Dr. RS Rajoria “Modification in Fixture by Computer-Aided-Fixture-Design (CAFD) In Manufacturing Process of Steering Nut to Reduce Defects International IJMT
Dr. RS Rajoria Titled “Defect Analysis by Failure Mode and Effect Analysis (FMEA) In Manufacturing Process of Steering Nut International IJMT
Dr. RS Rajoria Optimization in EDM Operations Using Taguchi Parameter Design for Cobalt Bonded Tungsten Carbide (Wc-Co) International IJMT
Dr. RS Rajoria Experimental Investigation Of Surface Integrity Of Cobalt Bonded Tungsten Carbide (Wc-Co) Using EDM Process Material International IJMT
Dr. RS Rajoria Effect of Load on the Characteristics of Linear Motor Used in Free Piston Free Displacer Miniature Cryocoolers International (IJEE).
Dr. RS Rajoria State of The Art In Artificial Intelligence and Its Impact on CAD/CAM International Proceeding
Dr. RS Rajoria Ozone Depletion and Global Warming – A Review International Proceeding
Dr. RS Rajoria Alternative Utilization of Solar Water Heater for Air Heating International ICARE
Dr. RS Rajoria Nanomaterials – A Review International RTMA (Proceeding)
Dr. RS Rajoria Operation sequencing in CAPP using Genetic Algorithms International RTMA(Proceeding)
Dr. L C Singal     Dr. RS Rajoria Solar Energy for Instant Air Heating International International Conference on Engineering Innovations A Fillip to Economic Development      Continental Group of Colleges  Jalvehra  Fatehgarh Sahib  Punjab India
Dr. L C Singal   Dr. RS Rajoria Ozone Depletion and Global Warming—A Review International GTME Global Trends in Mechanical Engineering    Ryat and Bahra Institute of Engineering and Biotechnology  INDIA
Pawan Nain Genetic algorithm approach to solve job-shop scheduling problem with sequence dependent set up times International ICMR
Dr. L C Singal    Dr. RS Rajoria “Cryogenic Processes – A Review” International IJEST
Dr. L C Singal    Dr. RS Rajoria “Thermodynamic Analysis of Free Piston Free Displacer Miniature Cryocoolers with Real Processes” International IJEST
Dr. L C Singal    Dr. RS Rajoria  Non Conventional – Energy Cooling For Rural Development” International IJTAM
Satish Kumar     N. P. Singh Experimental Analysis of Thermal Performance of a Solar Air Heater Having Thermal Mass (Metallic Chips) Placed on Collector Surface and Compare it with Simple Flat Plate Collector Solar Air Heater International Proceeding
Karanveer Singh Cheema Hybrid (desiccant + conventional) dehumidification air conditioning- a less exploited technology International IJRMET
Karanveer Singh Cheema Study the performance of liquid desiccant regenerator with PVC zigzag packing International Mechanica confab
HARJOT SINGH Parametric Analysis of Copper for Cutting Processes Using turning operations based on Taguchi method International IJRMET
Parveen Kr Saini     Pankaj Sharma   Nittin Saluja Different Implementations of Variable Valve Timing to a CAM Engine – A Study International IRJES
Ramandeep Singh Experimental investigation of Surface roughness by considering different parameters on CNC turning for EN-8 International International Conference on emerging trends in Engg. and Tech.
Paramvir singh kang FINISHING OF SUS 304 STAINLESS STEEL BENT TUBES USING MAGNETIC ABRASIVE FINISHING International CONFAB JOURNAL
Parveen Kr. Saini and Sanjeev Garg An Investigation on Machinability of Titanium Alloy by Ultrasonic Machining Using Taguchi Method International International Journal of Surface Engineering and Interdisciplinary Materials Science
Parveen Kr. Saini Ultasonic machining of Ti-6Al-4V using cryogenic treated tools International International Journal of Research in Mechanical Engineering Technology
ANIKATE GUPTA.   SV RAMAGOPAL.  AJAY BATISH.  ANIRBAN BHATTACHARYA SURFACE ROUGHNESS AND PROFILE ERROR IN PRECISION DIAMOND TURNING OF C18000 International MATERIALS AND MANUFACTURING PROCESSES
Ramandeep Singh Dhindsa.  Jagteshwar Singh Sidhu. Synthesis and Characterization of Biomaterial Hydroxyapatite International INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY
Inderjeetsingh An experimental approach to study the effect of welding parameters on similar friction stir welded joints of AZ31B-O Mg alloy International Elsevier
Inderjeetsingh Effect of Tool Rotational Speed on tensile and impact strength of Friction Stir Welded joints of Aluminum 6063 alloy International IJECT
Gurkirat singh bhatia COLD FLOW ANALYSIS IN AN ANNULAR GAS TURBINE COMBUSTOR USING CFD TOOL International IJAERD
Gurkirat singh bhatia STUDY THE EFFECT OF CARBIDE AND HSS DRILLING ON SURFACE ROUGHNESS OF Al/SiC-MMC International IJAERD
Inderjeetsingh Effect of Process Parameters of Non Rotating Electrode Discharge Machining of Al/SiC MMC on Material Removal Rate and Electrode Wear Rate International IJERA
Manmohan Singh A Computer-Aided System for Life Cycle Assessment of a Pressure Die-Casting Process International IJERD
Rohit Dhawan Analyzing Micropolar Lubrication in Noncircular Hybrid Journal Bearings International Taylor and Francis Group
Pawan Nain Application of Acoustic Signal for Wear Detection of Gear International ICET-
Pawan Nain Experimental Analysis of Process Parameters on Machining Performance of WED International ICET-

List of papers presented in National Conferences:

Author(s) National/Internation Journal/Venue
Dr. RS Rajoria Nano Technology – Future Ahead National TIME-2k8
Dr. RS Rajoria Study of Charging Media in a Cement Ball Mill National TIME-2k7
Dr. RS Rajoria Stirling Miniature Cryocoolers – An Overview National TIME-2k8
Dr. RS Rajoria Automated CNC Part Programming and Process Planning For Turned Components National TIME-2k8
Satish Kumar & N. P. Singh Comparison of Thermal Performance of Solar Air Heater Having Thermal Mass National Proceeding
Satish Kumar & N. P. Singh Experimental Analysis of Thermal Performance of a Solar Air Heater Having Thermal Mass (Iron Chips) Placed on Collector Surface and Compare it with Simple Flat Plate Collector Solar Air Heater. National Proceeding
Parveen kr. Saini Investigating the effect of Tool and Work Material in Ultrasonic Machining of Titanium Alloys National National Conference on Present Scenario and Advance Technology in Mechanical Engineering
HARJOT SINGH A REVIEW STUDY TO ANALYSE INFLUENCE OF EDM PARAMETERS ON MRR SURFACE ROUGHNESS AND TOOL WEAR RATE ON CBN AS WORK MATERIAL USING TAGUCHI L27 National National Conference ON advancement in Simulation & Experimental Techniques
HARJOT SINGH A STUDY TOWARDS MULTI-RESPONSE OPTIMIZATION OF EDM PROCESS FOR TUNGSTEN CARBIDEUSING RESPONSE SURFACE METHOD National National Conference ON advancement in Simulation & Experimental Techniques
Rohit Kumar    Inderjeet Singh A review of friction stir welding on aluminum alloys National National Conference

 

List of ongoing PHD’s

S.no . Name Position D.O. J. Education Quali.
1 Mr. Paramvir Singh Kang AP 6-Aug-09 Ph.D pursuing
2 Mr. Gurpreet Singh Bedi AP 16-Jan-07 Ph.D pursuing
3 Mr. Ramandeep Singh Dhindsa AP 7-Sep-12 Ph.D pursuing
4 Mr.Vikasdeep Singh Mann AP 8-Jul-12 Ph.D pursuing
5 Mr. Inderjeet Singh AP 9-Jul-12 Ph.D pursuing
6 Mr. Ramandeep S. Deorda AP 21-Jan-13 Ph.D pursuing
7 Mr. Farman Khan AP 24-Jul-13 Ph.D pursuing
8 Mr. Pawan Kumar AP 18-Jul-14 Ph.D pursuing

 

Area of research in department

  • Production Engg.
  • Thermal Engg.
  • Industrial Engg.

 

Innovation By Students

 







© Copyright 2015, Chandigarh Engineering College (CEC), All rights reserved Admission Help Line
Campus Landran 0172-3984234,235,236 95921-04444, 95921-14444, 95921-24444, 99150-30609
Campus Gharuan 0160-3014444, 3014424 95920-02514, 99159-99223, 99159-99224